1-901-859-0000 info@midsouthlaserengraving.com

AR 15 Magazine – Identify As

$25.00$32.00

RELIABILITY SAVES LIVES.

Reliability in a magazine means two things; less time where a shooter is exposed to danger, and more time spent engaging the target. To be called reliable, a magazine needs to do several things really well. It must feed as flawlessly as possible under normal and adverse conditions. It must resist damage due to rough handling, impacts, and other hazards of extreme use. It must be easy to maintain and clean. To be reliable, a magazine must be unstoppable.

For decades, weapons stoppages due to magazines were common and considered a fact of life. Magpul set out to change that, and in 2007 the firearms magazine market was changed forever with the introduction of the PMAG. It broke the reliability barrier by proving that a polymer magazine could not only meet, but also exceed, the durability and reliability of the USGI aluminum AR-15 magazine.

After a decade of rigorous government testing and hundreds of thousands of rounds later, the PMAG has proven itself to be the single-most reliable magazine made. To highlight this fact, in 2017 all four US military services, US SOCOM, and the US Coast Guard either fully adopted or accepted the PMAG as their primary magazine offering.

At Magpul, our entire line of magazines is designed, manufactured, and tested to exceed anything you’re likely to ask of them. Our demanding scientific testing procedures go well beyond what others consider “requirements,” and the results are clear. After a successful decade on the battlefield, where reliability counts most, the PMAG has earned the title of the most-fielded polymer magazine for the AR15/M4 family of weapons platforms.

 

Our engraving is on the surface of the outside of the magazine and does not affect the inner workings of the magazine, over the course of several years we have yet to have a single issue with this brand or the effects of lasering on them. However, if your product fails within a reasonable amount of time and/or usage please reach out to us directly.

Product Details

The next-generation PMAG 30 GEN M3 is a 30-round 5.56×45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Similar to the MOE PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in U.S.A.

Our engraving is on the surface of the outside of the magazine and does not affect the inner workings of the magazine, over the course of several years we have yet to have a single issue with this brand or the effects of lasering on them. However, if your product fails within a reasonable amount of time and/or usage please reach out to us directly.

Product Details

The next-generation PMAG 40 GEN M3 is a 40-round 5.56×45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

The PMAG 40 GEN M3 features a long-life stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.

In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches. An included pop-off Impact/Dust Cover can optionally be used to minimize debris intrusion and protect against potential damage to the top cartridge during storage and transit.

Made in U.S.A.

Our engraving is on the surface of the outside of the magazine and does not affect the inner workings of the magazine, over the course of several years we have yet to have a single issue with this brand or the effects of lasering on them. However, if your product fails within a reasonable amount of time and/or usage please reach out to us directly.

MAG800 30 300bkThe PMAG® 30 AR 300 B GEN M3™ is a purpose-designed magazine for rifles chambered in 300 Blackout®. Since its inception, 300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the nice features of 300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a dedicated 300 Blackout magazine was a logical step for the PMAG line.

In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 Blackout rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 Blackout round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B brings along all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification, and a dust/impact cover.

• The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG

• Dedicated, purpose-designed magazine for rifles chambered in 300 Blackout
• Optimized internal geometry accommodates the wide variety of bullet profiles used in 300 Blackout cartridges
• Carries forward the physical & performance features of the rest of the GEN M3 line

Blackout is a registered trademark of Advanced Armament Corp.

 

Only logged in customers who have purchased this product can leave a review.
Scroll to Top

Shipping Delays – All orders placed between now and Oct 1st will be shipped October 4th